The rest/timed-work countdown deadline is shared by both devices, but the
page flip crossing it is a local ticker event — and stamping the *next*
phase's anchor at Date() when that event finally ran baked a sleeping
watch's lateness (throttled wrist-down ticker) into its next count-up,
leaving the two devices permanently offset with nothing on the wire to
correct.
Auto-advances now chain the anchor instead: the finished phase's computed
end (passed out of CountdownPhaseView) becomes the next page's PageAnchor,
with the next window derived from it via liveSnapshot(for:at:). A device
arbitrarily late to a boundary shows exactly what the on-time device shows,
and a stack of missed boundaries fast-forwards itself — each chained page
lands already-elapsed and advances on its own next tick, skipping the
start/stop haptics for boundaries that passed while asleep (only a
just-crossed boundary buzzes).
The remoteAnchor* fields are generalized into one PageAnchor (remote frames
and chained auto-advances are the same concept: a page whose timer counts
from a known instant); the phone's Live Activity emit honors it unchanged.
Live frames ride sendMessage, which is reachable-only — and phone→watch
reachability drops exactly when the user is swiping on the phone (wrist
down). A frame that failed to send was staged but never retried until a
reachability edge, and a frame lost outright desynced the run until the
next human transition — sometimes forever, since a reconnect could even
re-send the stale staged frame and yank the peer backwards.
Four fixes, symmetric on both bridges and both run screens:
- A send that fails while nominally reachable now retries with a short
backoff (a few times per staged message) instead of being swallowed.
- Receiving a frame that outranks the staged outbound one drops the
staged frame, so a reconnect re-send can't move the run backwards;
a delivery the staged frame outranks is ignored as stale.
- Every staleness comparison now tie-breaks the shared version sequence
on the frame's wall-clock anchor (LiveProgress.isNewer) — after a
lost frame both devices can mint the same version, and the later
human action must win.
- Durable repair: when the absorbed workout doc shows sets completed
beyond anything the open run screen recorded or followed, it jumps
forward to the first unfinished set's work page — a lost frame now
degrades to a briefly-stale page instead of a stuck one.
The half-and-half split (paged timer over the looping form-guide figure)
is now iPhone-only. On the watch the ExerciseProgressView TabView fills the
whole screen — the figure slot is gone from both the active flow and the
Completed state, and the ExerciseFigure sources and ExerciseMotions
resources are dropped from the watch target since nothing there uses them.
Claude-Session: https://claude.ai/code/session_01HJDQQDA9QdP8zByg43H5v3
The orbit was always a real camera orbit — figure and props share one
rigid rotation — but a bar's screen-space angle authored the wrong 3D
rod: the default horizontal encoded a rod along the body axis, so
barbells hovered fixed on screen and vanished at the head-on view
where they should span widest. Line props now take "axis": "z" (both
renderers in lockstep, fixture-pinned): the world left-right direction
projects through the camera pitch like the floor quad — end-on plates
in profile, full span face-on, swinging with the hands in between.
Applied to the ten cross-body bars; vertical handles were already
orbit-invariant.
Goblet Squat's hand pins sat so close to the shoulders that the
two-bone IK was degenerate, flipping between a chicken-wing and an
elbow-behind solve; re-pinned level with the shoulders so the elbows
tuck straight down through the whole rep.
Claude-Session: https://claude.ai/code/session_01HJDQQDA9QdP8zByg43H5v3
Changelog entries for the Live Activity, mid-workout library adds,
backups, diagnostics, watch-only Health recording, navigation and
accessibility improvements, and the bug fixes; README key features
updated to match.
Claude-Session: https://claude.ai/code/session_01HJDQQDA9QdP8zByg43H5v3
Weight moves up beside the exercise name (matching font), sets × reps
sits below it with a dimmed ×, and recorded machine settings show as a
secondary line under the name — no placeholder when unconfigured.
Single-line bodyweight rows center against the checkbox.
Claude-Session: https://claude.ai/code/session_01P152LxjZ4vePHsSorQa5Jf
Abdominal's pinned hands used elbow -40 as the IK plane hint, drawing
the arms hyperextended (user-reported). Flipping the hint bends the
elbows the natural way while the hands stay on the handles. Same class
of fix for the milder cases: Arm Curl and Shoulder Press elbows and
Calfs knees clamp to -8, Side Plank's raised arm to the -70 ROM cap.
The whole library now passes render.py --strict with zero warnings,
making it a valid verification gate. Fixtures regenerated; 48 tests
green.
Claude-Session: https://claude.ai/code/session_01HJDQQDA9QdP8zByg43H5v3
render.py --export bundles the 25 new motion rigs and info pages;
figure-fixtures.json regenerated for all 47 (the Swift solver reproduces
every new motion, including negative-y pins and the new prop uses). The
fixture count assertion moves to 47, and the no-bundled-motion test now
uses Treadmill - a permanent COVERAGE.md exclusion - since Bench Press
exists. 48 tests green; watch target builds. Coverage handoff complete -
TODO-coverage.md retired.
Claude-Session: https://claude.ai/code/session_01HJDQQDA9QdP8zByg43H5v3
With the equipment layer carrying world-space 3D form, the prop-free
gate comes off: machines now get the same slow orbit as the bodyweight
moves, their seats, cables, bars, and rollers turning with the figure.
Closes out the orbit-for-all-exercises plan.
Claude-Session: https://claude.ai/code/session_01HJDQQDA9QdP8zByg43H5v3
The floor rectangle was screen-locked, which broke the illusion the
moment the camera orbited. It is now a world-space quad on the ground
plane, sized to each motion's projected footprint across its key frames
and rotated through the same camera as the figure - a long rectangle in
profile, a parallelogram mid-orbit, end-on when face-on. Both renderers
in lockstep; fixtures unaffected (the mat is a pure addition).
Claude-Session: https://claude.ai/code/session_01LEoff8bXGBS83tK1c55Mf7
The default camera pitches down 10 degrees, so the floor reads as a
plane (drawn as a rectangle) and near/far contacts straddle it.
Elevation is pure presentation - IK pins solve in the flat authored
view and the posed body tilts, the same pattern as the orbit, so
authored canvas targets never go out of reach. The leg-extension
roller moves up onto the shin above the ankle and the leg-curl roller
tucks under the heel. Fixtures and reference test values regenerated
for the pitched camera.
Claude-Session: https://claude.ai/code/session_01LEoff8bXGBS83tK1c55Mf7
Shoulder and pelvis widths grow to human-like proportions per profile
(shoulders wider than hips for neutral/male, reversed for female) and
are now drawn — bars across the attach points that read near-full-width
face-on and as a shoulder/hip nub in profile, so limbs visibly hang
from a torso instead of a point. Orbiting no longer re-solves IK pins
in the rotated view (pins are canvas targets in the authored camera):
the pose resolves first and the posed body rotates, which fixes hands
sticking to stale screen points mid-orbit (Cat-Cow, Bird Dog, Plank).
Leg Extension and Leg Curl swap their ankle bars for a machine roller
disc — a new `roller` prop riding the shin's press side. Fixtures
regenerated; both renderers updated in lockstep.
Claude-Session: https://claude.ai/code/session_01LEoff8bXGBS83tK1c55Mf7
Bodyweight motions (no equipment layer, no hide list) now turn the
camera a full revolution every 24 seconds while the motion loops, so
the exercise reads from every side; machine exercises keep their
authored view, since scene equipment is a view-locked billboard and a
hide list describes a single viewpoint.
Claude-Session: https://claude.ai/code/session_01LEoff8bXGBS83tK1c55Mf7
The library's planar world-angle rig becomes a genuine 3D anatomical
model: skeleton.json holds bone-length profiles (real shoulder/pelvis
widths, feet, neutral/female/male) and per-joint ROM; motions pose
joints with anatomical angles (flexion/abduction/rotation from neutral
standing) under a per-exercise orthographic camera, resolved by
kinematics.py (3D FK, analytic two-bone IK with anatomical write-back)
and validated against physiological ranges. All 20 sagittal motions
were migrated by planar decomposition with 0.00 px golden parity against
the old renderer — relabeled to true anatomy, since shading is now
near-dark/far-light by camera depth rather than by limb suffix — and
the face-on machines are re-authored honestly: Abductor/Adductor with
real hip abduction (the foreshortened "frontal" profile is retired) and
Rotary with genuine spine axial rotation. Figures gain articulated
feet; profiles swap without touching a single motion script; --orbit
sweeps the camera 360° while a motion loops.
The in-app SwiftUI renderer (iOS + watch) is ported to the same model
and consumes the exported motions verbatim; figure-fixtures.json pins
its geometry to the Python pipeline within 0.5 px across every
exercise, key frame, tween, and orbit sample. Also makes the watch
bridge logger nonisolated for the newer SDK's stricter isolation
checking.
Claude-Session: https://claude.ai/code/session_01LEoff8bXGBS83tK1c55Mf7
The exercise picker now lists the bundled exercise library — the
motion-rig exercises exported from Exercise Library/ — instead of the
two *.exercises.yaml starter catalogs. ExerciseListLoader and the Yams
dependency are removed; ExerciseMotionLibrary gains exerciseNames, the
bundle enumeration the picker reads.
Starter splits ship as byte-canonical SplitDocument JSON with fixed
ULIDs (Workouts/Resources/StarterSplits, regenerated by
Scripts/generate_starter_splits.swift) and auto-seed after connect into
a verifiably empty container, re-checked after a settle delay — wrong
guesses are harmless because identical bytes make same-path conflicts
empty and tombstones reap resurrected seeds. Seeds are immutable:
SyncEngine.save(split:) forks an edited seed to a fresh ULID and
soft-deletes the original, whose stub is exempt from pruning
(IndieSync 0.3.0 prune(exempting:)) and vetoes resurrection forever;
split views resolve by id through a redirect map to follow the swap.
Add Starter Splits in Settings restores deleted seeds by lifting the
veto stub and rewriting the bundle bytes.
Also fixes ingestFromWatch bypassing the tombstone veto (a phone-deleted
workout resurrected when a stale watch resent it) and reaps a live file
immediately when its tombstone arrives.
SplitDetailView also picks up the category-grouped exercise sections
from the exercise-category work.
Closes the last open loop of the HealthKit feature (decision C from
HealthKit-Delete-Loop.md, now retired): the history-list delete dialog
gains a "Delete + Remove from Apple Health" option, shown only when the
workout has a Health record. Removal is best-effort via the workout's
stored HKWorkout UUID; watch-recorded workouts are authored by the
watch app's separate HealthKit source and may be refused, so the dialog
notes they may need deleting in the Health app instead. Discarding an
in-progress workout is unaffected (no Health record exists yet).
Watch sessions now run an HKLiveWorkoutBuilder: heart rate and active
energy are collected live (shown in an in-workout HUD), saved to Health
as a real HKWorkout on completion, and carried back to the phone as
WorkoutMetrics on the workout document. Phone-only workouts get an
estimated Health workout (MET x bodyweight x duration) after a 10s
debounce that a late-arriving watch session cancels; a launch sweep
backfills workouts completed within the last day. Dedupe is keyed on
metrics.healthKitWorkoutUUID plus the metrics source.
Splits gain an activity type (strength, functional, HIIT, core, cardio,
cycling) that categorizes the Health workout and picks the MET value.
A post-workout summary sheet (duration, calories, avg/max HR, HR zones,
total volume) fills in live and is also shown on completed workouts.
Weights can now display in lb or kg (display-only relabel), synced to
the watch over the existing application context.
WorkoutDocument schema 1->2 (metrics are irreplaceable, so older apps
must quarantine rather than strip them); cache schema 2 rebuilds the
SwiftData store with the new metric columns. Deleting a workout in the
app intentionally leaves its Health record in place.
Ports QuickRabbit's resolveConflictsIfAny (R4.3) into the eviction-safe read
path: before every coordinated read, pick the NSFileVersion with the latest
modification date, promote it to the canonical file inside a coordinated
write, mark all conflicts resolved, and prune the losers. Without this,
conflict siblings from two-device edits (workout logs edited mid-session are
the risky case) accumulate silently and a read returns whichever version the
filesystem hands back.
Claude-Session: https://claude.ai/code/session_01SY5jsAUf4qoPxSvv8xAqXS
Wires the previously-dead ensureDownloaded into every read (it now polls,
bounded 30s, instead of fire-and-forget) and fixes the deeper hole: the
directory listing skipped hidden files, so evicted records — whose only local
trace is a hidden .<name>.json.icloud placeholder — never appeared in
reconcile at all and their cache entities were pruned as deleted.
Also: reconcile no longer prunes entities whose file failed to read this pass
(an eviction-download timeout is not a deletion); tombstone IDs come from stub
filenames so an evicted stub still vetoes resurrection; the stale-file stub
check is placeholder-aware; read failures log loudly instead of try?-skipping.
Verified with a harness compiling the real ICloudFileManager against a local
temp directory (placeholder mapping, dedup, tombstone derivation, soft-delete
round trip). Real eviction/download behavior needs a device pass.
Claude-Session: https://claude.ai/code/session_01SY5jsAUf4qoPxSvv8xAqXS
Watch-side follow-through for the End Workout flow:
- The phone now pushes an authoritative set (in-progress, not-started, and
completed within 24h) instead of the 25 most-recent workouts, and the watch
prunes any workout absent from it. So a Discard/Delete (or a completed run aging
out) drops off the watch, empties its active list, and ends the HKWorkoutSession
— fixing the persistent wrist-raise re-foregrounding. The watch never originates
a workout, so pruning can't lose local data; the 24h grace keeps a just-finished
run on screen. The gate pops if the run you're viewing is pruned.
UX tweaks:
- The in-workout ⋯ is now a pull-down Menu (Add Exercise / End Workout) rather than
an action sheet.
- Starting a split while another workout is still active now prompts to end the
current one(s) — keeping their progress — or run in parallel. Wired into both
start paths (the split picker and "Start This Split"), via a shared
WorkoutDocument.endKeepingProgress() helper.
Claude-Session: https://claude.ai/code/session_01SCv7zvGFcKy47KSTnTLxRe
Replace the in-workout "+" toolbar button with an ellipsis menu offering
"Add Exercise" and "End Workout". Ending opens a Save/Discard action sheet:
Save marks the remaining exercises as skipped and resolves the workout to
completed (stamping end), which drops it off the watch's active list and ends
the watch's HealthKit session; Discard soft-deletes it.
Teach the status-from-logs derivation that a skipped log is terminal, and
consolidate the three duplicated copies into a single shared
WorkoutDocument.recomputeStatusFromLogs() so an ended workout stays finished
regardless of which screen the next edit comes from.
Claude-Session: https://claude.ai/code/session_01SCv7zvGFcKy47KSTnTLxRe
Stop giving up on a slow iCloud container: a freshly enabled iCloud Drive
that reports nil while still provisioning is now polled patiently for up
to ~10 minutes instead of failing fast to the "unavailable" screen. A nil
ubiquity token (not signed into iCloud at all) still fails immediately,
and the connecting screen reveals an escape hatch at 28s for users who'd
rather jump to setup than keep waiting.
The connecting and iCloud-required screens are now branded — a purple
gradient with teal accents — and the spinner becomes a custom comet-arc
ConnectingIndicator around an iCloud glyph. Connecting copy escalates
with the wait so a slow first connect reads as steady progress.
Claude-Session: https://claude.ai/code/session_01SCv7zvGFcKy47KSTnTLxRe
In the Always-On / wrist-down state, watchOS throttles the system timer
text and collapses sub-minute values to a relative "< 1 min", which
overflows the 50pt counter font and truncates with an ellipsis.
Gate PhaseTimerLayout on isLuminanceReduced: keep the live system timer
while active, but render our own held "~m:ss" snapshot from the wall-clock
anchors in Always-On — so the count stays numeric and on-screen. Timing is
unaffected (haptics/auto-advance still run off the anchor, not the text).
Claude-Session: https://claude.ai/code/session_01SCv7zvGFcKy47KSTnTLxRe
A static WidgetKit accessory widget (launcher only — no data sharing,
App Group, or entitlements). Tapping any accessory widget opens its
containing app, so this is enough to place a Workouts button on the
watch face. Supports the circular, corner, inline, and rectangular
accessory families.
New 'Workouts Watch Widget' app-extension target embedded in the watch
app via project.yml.
The propped-up iPhone now runs the real ExerciseProgressView for a live
watch workout instead of a read-only mirror, and the live-run channel is
symmetric — either device can drive the flow and the other follows.
Each page transition is classified human / auto / remote: only human
transitions (swipe, Start, One More, swipe-back reset) are broadcast and
recorded by the actor; auto-advances (rest / timed-work countdown) record
locally but aren't sent, since both devices reach them independently off
the shared wall-clock anchors; an applied remote frame jumps the page
without re-recording or re-broadcasting. That rule is also what stops an
echo loop.
- PhoneConnectivityBridge gains sendLiveProgress/sendLiveEnded (the
missing phone->watch direction); WatchConnectivityBridge receives
frames into an observable liveIncoming via a new didReceiveMessage
route. Both share one increasing per-run version sequence so the
stale-frame guard works across the two devices' counters.
- Both ExerciseProgressViews gain an incomingFrame input + applyIncoming
(syncing setCount for a remote One More); the iPhone one gains the
liveSnapshot/broadcast machinery the watch already had.
- New LiveRunCoverView wraps the real driver for the cover (resolves the
workout, persists via SyncEngine, wires the live channel + close);
ContentView presents it; LiveProgressMirrorView is removed.
Claude-Session: https://claude.ai/code/session_01SCv7zvGFcKy47KSTnTLxRe
Move the idle-timer disable out of ExerciseView/ExerciseProgressView and
up to the app scene, re-asserting it whenever the scene becomes active
(iOS clears the flag on background). A propped-up phone now stays lit for
the entire workout, not just while an exercise is open.
Claude-Session: https://claude.ai/code/session_01SCv7zvGFcKy47KSTnTLxRe
Add an ephemeral live-run presence channel (separate from the durable
iCloud progress sync) so a propped-up iPhone can mirror the Watch's
Ready → work/rest → Finish flow in real time as the user swipes.
Watch drives, phone mirrors (read-only), so there's no echo loop:
- Watch's ExerciseProgressView broadcasts a LiveProgress frame on every
phase transition (and an ended signal on leave) via sendMessage,
reachable-only — throwaway presence, never written to iCloud.
- Timers ride as wall-clock anchors (Date kept native in the WC dict to
preserve sub-second precision), so both devices count independently
off shared start times and stay in lockstep without streaming ticks.
- Phone holds a transient LiveRunState; ContentView auto-presents a
read-only LiveProgressMirrorView full-screen cover while a run is live.
Claude-Session: https://claude.ai/code/session_01SCv7zvGFcKy47KSTnTLxRe
Publish an exclusive-edit lock (editingWorkoutID / editingSplitID) in the
phone→watch application context. While the phone has a workout's exercise
(ExerciseView) or a split (SplitDetailView) open in an editor, the watch pops
out of that run, blocks re-entry, and shows it as "Editing on iPhone" — so the
two devices never drive the same run at once and the watch can't clobber the
phone's edit with a stale optimistic write. The lock clears when the editor
closes; absent keys in the latest-wins context mean "not editing".
Claude-Session: https://claude.ai/code/session_01SCv7zvGFcKy47KSTnTLxRe
Populate the previously-empty AccentColor asset (iOS + watch) with the
logo purple — a deep shade in light mode, brightened for dark mode and
the watch's black background. The exercise Done check now uses that
accent color and the in-progress indicator reads as a neutral gray, on
both iPhone and Apple Watch.
Derive entries from the git log, rewritten for end users: one
blank-line-separated paragraph each (no dash markers, which the
in-app Apple inline-Markdown renderer doesn't style), keeping only
user-significant changes, splitting multi-change commits and
collapsing duplicates. Extends coverage back to the January 2026
pre-2.0 history so the CloudKit -> iCloud Drive arc is visible.
Claude-Session: https://claude.ai/code/session_01A9CfUa4E9Zd5swfoNsYPs7
Tapping an exercise now opens ExerciseProgressView -- the watch's Ready -> work/rest -> Finish flow on iPhone, with rep sets counting up, timed sets and rests counting down and auto-advancing, a work-set dot row (dash on the active set, gap widening at the current rest), and capsule Start/Done/One More buttons. The detail/edit screen moves behind a trailing Edit swipe (leading swipe still completes). Swiping back to the Ready page resets the run.
- iPhone: disable the idle timer while the exercise detail screen is open,
so the display no longer sleeps mid-set.
- Watch: the work/rest timers counted on a run-loop Timer that watchOS
throttles in the Always-On (wrist-down) state, so they froze. Anchor both
to a wall-clock Date rendered with SwiftUI's self-updating timer text;
rest haptics + auto-advance now derive from the end time so they catch up
after a stall instead of stalling.
Set TARGETED_DEVICE_FAMILY to 1 for the iOS target — it was universal (1,2) but
isn't an iPad experience, which forced an iPad screenshot requirement at
submission. The Apple Watch app is a separate target (family 4) and is unaffected.
Removes the iPad screenshot set from the listing metadata.
Claude-Session: https://claude.ai/code/session_018gg69MaUetDNzWzBXisfMV
DEBUG-only screenshot support (seeded sample data via ScreenshotSeed, per-screen
launch args, screenshot roots for both apps) so iPhone + Apple Watch App Store
shots can be captured deterministically from the simulator — all excluded from
release builds. Also seed ExerciseView's set-grid progress in init so it renders
correctly on the first frame. Adds Scripts/metadata/ as the listing source of
truth (copy, URLs, review notes, and the captured screenshots).
Claude-Session: https://claude.ai/code/session_018gg69MaUetDNzWzBXisfMV
ExerciseView now observes workout.updatedAt and pulls the latest doc/progress
from the cache, mirroring WorkoutLogListView. A set completed on the watch now
advances the iPhone set grid in real time instead of only on re-entry.
Claude-Session: https://claude.ai/code/session_018gg69MaUetDNzWzBXisfMV
ingestFromWatch now upserts the SwiftData cache directly after writing the file,
instead of relying on the NSMetadataQuery observer — a same-process file
overwrite doesn't reliably emit a modified event, so watch progress never reached
open iPhone screens. iCloud Drive stays the source of truth (file written first);
the observer re-applies idempotently if it fires.
Claude-Session: https://claude.ai/code/session_018gg69MaUetDNzWzBXisfMV
Completing a work phase advances the set count to the iPhone, and a finished
set is never un-counted — a transient paged-TabView snap to page 0 can no longer
overwrite progress with 0. Reopening an exercise now jumps to the first
unfinished set's work page (re-asserted after first layout) instead of starting
back at set 1.
Claude-Session: https://claude.ai/code/session_018gg69MaUetDNzWzBXisfMV
- Redesign the watch app into an active-workout runner: a root gate shows the
in-progress workout's exercises or prompts to start one on iPhone, and each
exercise runs as a horizontally-paged HIIT cycle (count-up work, count-down
rest with final-three-second haptics + auto-advance, One More / Done on the
last set). Replaces the old history list.
- Add a configurable rest-between-sets duration in iPhone Settings (default 45s),
synced to the watch over WatchConnectivity.
- Launch the watch app into the session when a workout starts on the phone via
HealthKit (startWatchApp); the watch runs an HKWorkoutSession for foreground
runtime and ends it when the workout finishes. Adds the HealthKit entitlement +
Health usage strings on both targets and WKBackgroundModes on the watch.
Claude-Session: https://claude.ai/code/session_018gg69MaUetDNzWzBXisfMV
Replace the bodyweight-catalog-derived seed (hardcoded 3x10, weight 0) with an
explicit curated machine-based routine: Upper Body, Core, and Lower Body at 4x10
with starting weights taken from real workout logs. Decoupled from the shared
exercise catalog YAML (still used by the exercise picker).
A row tap pushed twice: a value-based navigationDestination(for: String.self)
collided with the row's NavigationLink(value:), surfacing a duplicate split list
over the hidden exercise detail. Rows now use a destination-based NavigationLink,
leaving navigationDestination(item:) as the view's only destination.
Replace the teal circular mark with a full-bleed purple gradient and a
larger tilted dumbbell, applied across all iOS sizes and the Watch icon.
Icons are alpha-free RGB for App Store compliance.
Replace Core Data + NSPersistentCloudKitContainer + App-Group store +
WatchConnectivity dictionary sync with the QuickRabbit iCloud-documents
architecture:
- iCloud Drive JSON documents are the sole source of truth (one file per
aggregate: Splits/<ULID>.json, Workouts/YYYY/MM/<ULID>.json), with a
rebuildable SwiftData cache populated only by an NSMetadataQuery observer
and a connect-time reconcile. Soft-delete tombstones; hard iCloud gate.
- Shared model layer (ULID, Codable *Documents + stateless mappers, @Model
cache entities, SwiftData container) compiled into both targets.
- New iPhone<->Watch bridge over WatchConnectivity keyed by ULIDs; the phone
is the sole writer of iCloud Drive, the watch round-trips documents.
- AppServices DI + iCloud-required root gate; Swift 6 strict concurrency.
- Starter splits generated on demand from the bundled YAML catalogs.
- Migrate to XcodeGen (project.yml), iOS 26 / watchOS 26; CloudDocuments
entitlement (drop CloudKit/App Group/aps-environment).
- Duration stored as Int seconds (was a Date epoch hack); fix workout
end-on-create, undismissable delete dialog, toolbar-hiding nav stacks,
and the Settings placeholder.
- Add README/CHANGELOG/LICENSE, .gitignore, refreshed REQUIREMENTS, and the
Scripts/ TestFlight pipeline (release.sh + ASC API scripts).
MARKETING_VERSION 2.0.
rzen