Replaces the 5-second Steppers in Settings and the routine editor's
custom-rest row with a shared SecondsWheelRow: the row shows the value
and tapping it expands an inline wheel (10-180s, 1s steps) beneath.
Replaces the small target-HR pill on the iPhone run screen with a
glanceable big-digit strip between the timer flow and the figure —
heart rate (band-tinted with the cue arrow when the run carries a
target), HR zone, active calories, and the workout stopwatch. A
horizontal band in portrait, a vertical column in landscape (the
inverse of the half-and-half split, so it always sits between them).
The watch now rides the running calorie total and the HR zone (1-5,
computed watch-side where max HR is known) along with each live HR
sample; absent keys keep older builds wire-compatible both ways.
LiveRunState holds all three under the shared staleness expiry. The
screenshot rig seeds believable values so the run capture shows the
panel populated.
Re-entering an in-progress exercise on the watch now computes its landing
(page + wall-clock anchor) from the log's durable timestamps in init —
mid-set resumes the stopwatch from startedAt, mid-rest lands on the rest
page with the countdown continuing and auto-advancing at the true
boundary, and a spent rest anchors the next set at the rest's computed
end. Timestamps are clamped to now against peer clock skew; legacy logs
without them keep the old first-unfinished-set behavior. broadcastLive
forwards the resume anchor so a mirroring phone's timer lines up.
Claude-Session: https://claude.ai/code/session_01H8VxUX4ckjU3vRF5M4L5FV
The run-screen headline now reads "Library · Name" for a renamed exercise,
keeping its origin visible next to the custom name (the separate subtitle
line is gone). Logs minted before the per-log libraryName snapshot existed
carry none, which cost a renamed exercise its figure, guide, and spoken
cues — the screen now resolves the library identity through the workout's
routine (same-named exercise, display-only) as a fallback, so those older
workouts get their animated figure back, including on the Completed page.
Claude-Session: https://claude.ai/code/session_01H8VxUX4ckjU3vRF5M4L5FV
The run screen now hides the navigation bar in both orientations and draws
its own header — back chevron top-left, exercise name (plus library name
when renamed) in large type where the toolbar was, previewing the next
exercise during a between-exercise rest. Work and rest counters are pinned
to the exact vertical center of the timer half via equal flexible bands,
with the adjust pill moved to an overlay so complications can't shift them.
Counter digits are now state-driven and roll through numericText
transitions (work count-up, rest countdown, and the Done button count).
Reopening an in-progress exercise now resumes its timer from the durable
timestamps instead of restarting at zero: no sets done anchors the
stopwatch to startedAt; mid-rest lands back on the rest page with the
countdown still running off its true window; past the window the next
set's stopwatch counts from the rest's computed end. The resume page is
computed at init because the paged TabView must initialize on it — a
post-layout backward jump wedges the pager, which then ignores the next
animated programmatic advance.
Claude-Session: https://claude.ai/code/session_01H8VxUX4ckjU3vRF5M4L5FV
An exercise's name is now a per-routine display name: a new optional
libraryName on ExerciseDocument (snapshotted onto WorkoutLogDocument at
plan time) keeps the link to the bundled library exercise, and every
figure/info/cue lookup resolves libraryName ?? name. Deliberately not
schema-bumped — an older app dropping the key only strands the
figure link, same rationale as activityType. Cache schema bumped to 9
for the new columns.
The picker no longer filters out exercises already in the routine
(an "×N" badge marks them instead), exercise rows gain a leading
Duplicate swipe that clones an entry in place, and the edit sheet gets
a Name field with the library exercise shown read-only above it.
Claude-Session: https://claude.ai/code/session_01H8VxUX4ckjU3vRF5M4L5FV
Stance and flight keyframes with single-frame foot pins for the strikes,
forward lean, opposite-arm drive, and daylight under both feet in flight —
distinct from Cardio's high-knee march, which stays as is.
Claude-Session: https://claude.ai/code/session_01PKptrgbx74peTwHGRxBojv
Endurance routines (HIIT, cardio, cycling) can carry an optional target bpm
(RoutineDocument.targetHeartRate, not schema-bumped — same preference-field
rationale as restSeconds/autoAdvance), snapshotted onto the WorkoutDocument at
plan time like the other pacing fields.
During a run, the watch streams its live HR sample to the phone over a new
best-effort liveHeartRate message — deliberately outside the LiveProgress
machinery (no version bump, no staging/retry; a gauge, not a record), throttled
to changed-bpm-or-10s in the watch bridge. LiveRunState holds the sample with a
30s staleness auto-clear so a dead stream never shows a frozen number.
Both run screens show the reading only when the run carries a target: the
phone's ExerciseProgressView as a top pill, the watch's in the top-trailing
toolbar slot, each tinted by a shared ±5 bpm HeartRateBand with an arrow cue to
push harder (low) or ease off (high) — e.g. dialing in a treadmill incline to
hold a steady effort.
Claude-Session: https://claude.ai/code/session_01Y7ZhkCYWNiTSAFhFCGnJ8n
The landscape side-by-side split (paged flow | form-guide figure) is already
starved for height; keying tab-bar visibility off the same compact-vertical
size class that drives the split gives the run the full screen. Applied across
all three body branches (run flow, Completed, Skipped).
Claude-Session: https://claude.ai/code/session_01Y7ZhkCYWNiTSAFhFCGnJ8n
- ScheduleDocument/Schedule gain optional reminderMinutes (minutes from
midnight; decode-compatible, no schema bump)
- New Workout form gets a Reminder section (toggle + time picker, hidden
for Now; footer warns when notifications are denied)
- ReminderPlanner (pure, tested) derives notification triggers: daily
repeating, per-weekday repeating for fixed days, one-shot for once
- ReminderScheduler resyncs pending requests from the cache on every
change, multiplexed onto onCacheChanged after the watch push; asks
notification permission only once a reminder actually exists
- Due-filter schedules: daily always, fixed days by weekday, one-offs on
their date; rest days get an empty state
- Workouts with no due schedule row (ad hoc or off-day starts) now render
as their own board rows
- The + sheet is now "New Workout" with a "When" picker; "Now" (offered
when adding on today) skips the schedule and starts the workout directly
- Remove the times-per-week scheduling mode everywhere (enum, document,
entity, mappers, planner, seeds, tests)
Back/forward chevrons step the board a day at a time around the
existing calendar button, and a Today button — shown only when the
board is off today — jumps back. Also add the missing changelog
entries for the Today board itself.
Claude-Session: https://claude.ai/code/session_012qw2itfzKyEJ1HpsFt8Ex4
The UX redesign's first landing (spec in UX-REDESIGN.md): ContentView
becomes a Today / Progress / Settings TabView, "Routine" replaces
"Split" in every user-facing string and view name (code-level types
keep their names), and workout starting moves to shared
WorkoutStarter / StartedWorkoutNavigator plumbing.
- New Progress tab: weekly goal streaks, workout trends, per-exercise
weight progression, achievements, and the full history list
(WorkoutLogsView -> WorkoutHistoryView).
- Goals: stable categories workouts roll up to, managed from Settings.
- New Meditation exercise + starter routine; timed sits record to
Apple Health as Mind & Body sessions.
Claude-Session: https://claude.ai/code/session_012qw2itfzKyEJ1HpsFt8Ex4
TestFlight 2.3 (125) "crashed when watch ended an exercise": the
isDeleted guard from 85e1582 only covers the delete→save window. Once
the deletion is saved the model unregisters — isDeleted reads false
again, modelContext goes nil, and any persisted-property read still
traps (_InitialBackingData.getValue). StartedWorkoutNavigator retained
the run's @Model in @State for the whole workout, so an observer
remove/re-add churn (e.g. iCloud reachability flapping) invalidated it
underneath the pushed screen, and the watch's completion push triggered
the rebuild that read it.
Two layers: the fromLive/SplitDetailView guards now also require a
non-nil modelContext, and StartedWorkoutNavigator pushes a plain id
route, re-fetching the entity fresh on every destination build — a
re-imported run resolves to its live instance; a gone run shows a
placeholder instead of trapping.
Claude-Session: https://claude.ai/code/session_01PVNBVKp5bcq52X722uMjwT
A closure-based NavigationLink builds its destination view eagerly for
every row on every parent-list body evaluation — including the view-graph
update SwiftUI runs the instant SyncEngine.delete does context.delete +
save. Mapping the row's just-deleted @Model to a document there reads a
persisted property on a dead model, which traps in SwiftData
(_InitialBackingData.getValue -> assertionFailure). This is the "Crashed
when deleted a workout" TestFlight report on 2.3 (124).
Add WorkoutDocument(fromLive:) (nil when isDeleted) + a .deletedPlaceholder
and route every destination-init / updatedAt-absorb map through it:
phone WorkoutLogListView + SplitDetailView (read split.id) and watch
WorkoutLogListView. Fixes the whole crash class, not just the report.
Claude-Session: https://claude.ai/code/session_01BQcEWmAPA78338QuEwRkAh
The run flow's between-exercise rest now previews the next exercise — its
figure and a large "Coming up" name — and the hands-free narration gains a
per-second count-in ("<Exercise>, in 1, 2, 3, GO!") spoken before every set,
plus a "Coming up" announcement as a between-exercise rest begins. A new
Settings > Narration picker chooses the count-in cues, the setup/form read,
or both.
Also fixes spoken cues going silent after the first exercise in a flow split:
the stop-on-teardown moved from the per-exercise view (rebuilt on every
hand-off) to the run host, which stays mounted for the whole run. The audio
session now holds its duck across the per-second count so background music
doesn't pulse between words.
Claude-Session: https://claude.ai/code/session_01BQcEWmAPA78338QuEwRkAh
The decode-failure freeze (BULLETPROOFING.md L3) is production-reachable
after all - a phone app can update days before the watch app
auto-updates, and every push in between fails to decode, silently
freezing the watch at its last good sync. The bridge now tracks
schemaMismatch (set on a failed decode, cleared on the next good apply)
and ActiveWorkoutGateView shows an "Update both apps to resume sync"
banner while it's set.
Also give requestSync an error handler that logs the dropped pull (L2;
deliberately no retry - the activation/reachability edges re-pull), and
sync DEVICE-COMMUNICATION.md to the post-bulletproofing reality (T1 as
optimization, session recovery, degraded pushes, surfaced mismatch).
Claude-Session: https://claude.ai/code/session_01PVNBVKp5bcq52X722uMjwT
Two stale-UI traps in the run flow (BULLETPROOFING.md M2, M3):
A log resolved remotely (completed or skipped on the other device) left
the open exercise screen live - its next recorded set wrote the log
back to in-progress, resurrecting it through the per-log merge. Both
platforms' ExerciseProgressView now observe the log's status and
dismiss on a remote terminal flip (a locallyResolved flag exempts the
screen's own Done / flow hand-off). The watch also gains the phone's
startsSkipped terminal page, so opening a skipped exercise shows a
static badge instead of a live flow.
The live-mirror cover ran the flow engine with no onAdvance host, so an
auto-advance split's terminal between-exercise rest completed the
exercise then froze at 0:00. With no hand-off host it now dismisses
instead; the driver's next-exercise frame re-presents the cover.
Claude-Session: https://claude.ai/code/session_01PVNBVKp5bcq52X722uMjwT
Two watch-stranding fixes (BULLETPROOFING.md M1, M4):
The exclusive-edit lock rode in the latest-wins context and was cleared
only by onDisappear, so an editor left open in a pocketed (or
force-quit) phone parked the watch's run indefinitely ("Editing on
iPhone..."). The scene-phase hook now publishes the locks as cleared
while the app is backgrounded - without forgetting them locally - and
re-asserts them on return to the foreground.
pushAll treated a failed updateApplicationContext as log-only, so a
payload past WatchConnectivity's size ceiling silently froze the watch
out of all future state. A failed push now retries with the
recently-completed tail dropped (display-only on the watch); only a
failure of the slim push too remains an error.
Claude-Session: https://claude.ai/code/session_01PVNBVKp5bcq52X722uMjwT
The HKWorkoutSession could only ever be born via the phone's one-shot
startWatchApp handoff (BULLETPROOFING.md H1-H3): a dropped handoff, a
watch crash/reboot, or a run engaged manually on the wrist left the
whole workout sessionless - no heart rate, no Health save, app
suspending wrist-down - and "End Current & Start New" swallowed the
handoff against the old session's idempotency guard.
Now the coordinator self-starts a session on any reconcile that finds
an active run with none running (SessionEndPlanner.shouldStart /
runToStart, activity type from the run's split), recover() re-adopts a
crash-orphaned session at launch, and a system-ended session salvages
its Health save instead of dropping it. A .finish decided for a
session younger than 30s demotes to .discard so the stale-context
races can't save junk workouts attributed to the wrong run; parallel
completions now pick the survivor deterministically.
Claude-Session: https://claude.ai/code/session_01PVNBVKp5bcq52X722uMjwT
ExerciseListView is reached only via Settings > Splits > split > Edit >
Exercises, so its toolbar start button was effectively undiscoverable and
duplicated the home-screen split picker (the sole remaining start path).
Strip the button and its now-dead start flow: the active-workout prompt,
end-and-restart handling, started-workout navigation, and the AppServices
dependency. Also drop the changelog entry for the watch-launch wiring of
that button (f01e149) since the button no longer exists and never shipped.
Claude-Session: https://claude.ai/code/session_01PVNBVKp5bcq52X722uMjwT
A single "Cardio" library entry (running-in-place figure, duration-logged)
plus a matching Cardio starter split tagged .cardio (HealthKit .mixedCardio),
so the Apple Watch records the real aerobic workout while the phone logs the
time — no per-machine cardio entries or schema changes.
Claude-Session: https://claude.ai/code/session_012qw2itfzKyEJ1HpsFt8Ex4
Adds WorkoutActivityType.warmUp (HealthKit .preparationAndRecovery) and
.stretching (.flexibility), and retags the six starter splits that were all
mislabeled as Functional Strength:
- Warm-Up: Upper Body Warm-Up, Lower Body Warm-Up, Morning Wake-Up
- Stretching: Morning Mobility, Full Body Stretch, Evening Stretch
The split editor's activity picker surfaces them automatically (CaseIterable).
Older app versions decode the new raw values as the default type — additive and
not schema-gated, so no quarantine.
The "Start This Split" button on a split's exercise list minted and
saved the workout but never called WorkoutLauncher, so the Apple Watch
never came up when starting from there — only the home-screen split
picker launched it. Inject AppServices into ExerciseListView and call
launchWatchWorkout from start(), mirroring the picker path.
Claude-Session: https://claude.ai/code/session_01PVNBVKp5bcq52X722uMjwT
Two per-split settings, with the global Settings values as defaults:
- restSeconds: Int? — per-split rest, used between sets and (in flow) between
exercises; nil falls back to the global default.
- autoAdvance: Bool? — flow mode: finishing an exercise rests, then opens the
next one hands-free, all the way through the split.
Both are optional, snapshotted onto WorkoutDocument at the start sites (no live
split link), and not schema-bumped — same degradation pattern as activityType.
A thin RunFlowView wrapper (iOS + watch) owns the on-screen log and swaps it via
.id(currentLogID) on hand-off, so the per-exercise ExerciseProgressView stays
per-logID and untouched; the between-exercise rest reuses the existing .rest
countdown as the terminal page. The mirror reuses the per-logID live channel:
the wrapper suppresses the boundary .ended teardown so it follows across
exercises, and ContentView re-keys the cover on frame.logID — no sync-bridge
changes.
Morning Wake-Up ships as a flowing 45s-work / 15s-rest routine.
New Rest & Pacing section in the split editor exposes both controls.
Speak exercise setup and form cues aloud with AVSpeechSynthesizer:
- Library detail: a speaker toolbar button reads the full reference aloud.
- Active workout: an opt-in "Speak Exercise Cues" setting speaks a brief
cue (Setup/Execution/Cues) when an exercise starts, hands-free.
- Settings › Voice: pick the voice (auto-prefers an installed enhanced/
premium English voice), a premium-download nudge shown only while on a
basic voice, and a Speed/Pitch/Volume sheet with Reset to Defaults.
On-device and offline; ducks other audio rather than stopping it. iPhone
only for now. Shared SpeechSettings is the single source of truth for the
voice/prosody, read fresh per utterance so changes preview live.
Claude-Session: https://claude.ai/code/session_01BQcEWmAPA78338QuEwRkAh
ingestFromWatch arbitrated by whole-document updatedAt, so concurrent edits
to the same workout on both devices (phone edits exercise A while the watch
completes exercise B) lost one side wholesale — the newer snapshot replaced
the other (H1).
Reconcile per log instead. WorkoutMergePlanner (pure, deterministic) unions
logs by id, resolves each by newest per-log updatedAt, and applies
phone-authored deletion tombstones so an absent log is never ambiguous
between "deleted on the phone" and "just added on the watch". Edits to
different exercises now commute — delivery order and offline gaps stop
mattering. A stale/duplicate push merges back to exactly the cached doc, so
ingest re-pushes authoritative state rather than writing.
The per-log updatedAt scaffolding shipped (unused) in schema v4; it's now
stamped by transition(to:) on status flips and a new touch() at the
content-only edit sites (order, notes, machine settings, adjusted entries,
new logs) on both phone and watch. deletedLogIDs is new: additive on the
wire and cache, phone-authored (deleteLog), pruned after a 30-day grace.
Because an older build rewriting a file would strip the tombstones and
resurrect a deleted exercise, WorkoutDocument schema bumps 4->5 (forward
gate quarantines old builds) and the cache bumps 5->6.
recomputeStatusFromLogs takes an injectable now: so the merge recomputes
status/end deterministically. WorkoutMergePlannerTests pins the decision
table (commute, per-log newer-wins, legacy-nil, watch-add, tombstone
honored/resurrect/union/prune, status recompute, no-op re-push);
WorkoutDocumentMapperTests gains the deletedLogIDs round-trip.
The HKWorkoutSession that keeps the watch app foregrounded was ended only
by ActiveWorkoutGateView's onChange(of: activeWorkouts) — a view-level side
effect. When a run ended from the phone while the watch app was
backgrounded (kept alive only by the session) or torn down and rebuilt with
an already-empty list, that onChange never fired: the session leaked (the
app kept re-foregrounding on every wrist raise) and finishAndSave() never
ran, so the HR/energy summary was neither saved to Health nor forwarded.
Move session-end off the view into a long-lived WorkoutSessionCoordinator
owned by WatchAppServices, driven by a new bridge.onWorkoutsChanged
callback fired after every authoritative cache mutation (phone push or the
watch's own optimistic edit). The decision is a pure SessionEndPlanner
seam (mirrors WatchCacheApplier): a running session ends only on a genuine
non-empty -> empty transition of the active set, so the launch race (session
running before the run doc syncs) resolves to .none and never discards a
run we haven't heard about yet. Same move as the live-mirror's
repairFromDurable, one layer down.
Watch-only; no schema or wire change. SessionEndPlannerTests pins the
decision table; the OS-initiated-end path (system ends the session itself)
stays a documented residual in PLAN-watch-session-end.md.
The rest/timed-work countdown deadline is shared by both devices, but the
page flip crossing it is a local ticker event — and stamping the *next*
phase's anchor at Date() when that event finally ran baked a sleeping
watch's lateness (throttled wrist-down ticker) into its next count-up,
leaving the two devices permanently offset with nothing on the wire to
correct.
Auto-advances now chain the anchor instead: the finished phase's computed
end (passed out of CountdownPhaseView) becomes the next page's PageAnchor,
with the next window derived from it via liveSnapshot(for:at:). A device
arbitrarily late to a boundary shows exactly what the on-time device shows,
and a stack of missed boundaries fast-forwards itself — each chained page
lands already-elapsed and advances on its own next tick, skipping the
start/stop haptics for boundaries that passed while asleep (only a
just-crossed boundary buzzes).
The remoteAnchor* fields are generalized into one PageAnchor (remote frames
and chained auto-advances are the same concept: a page whose timer counts
from a known instant); the phone's Live Activity emit honors it unchanged.
Live frames ride sendMessage, which is reachable-only — and phone→watch
reachability drops exactly when the user is swiping on the phone (wrist
down). A frame that failed to send was staged but never retried until a
reachability edge, and a frame lost outright desynced the run until the
next human transition — sometimes forever, since a reconnect could even
re-send the stale staged frame and yank the peer backwards.
Four fixes, symmetric on both bridges and both run screens:
- A send that fails while nominally reachable now retries with a short
backoff (a few times per staged message) instead of being swallowed.
- Receiving a frame that outranks the staged outbound one drops the
staged frame, so a reconnect re-send can't move the run backwards;
a delivery the staged frame outranks is ignored as stale.
- Every staleness comparison now tie-breaks the shared version sequence
on the frame's wall-clock anchor (LiveProgress.isNewer) — after a
lost frame both devices can mint the same version, and the later
human action must win.
- Durable repair: when the absorbed workout doc shows sets completed
beyond anything the open run screen recorded or followed, it jumps
forward to the first unfinished set's work page — a lost frame now
degrades to a briefly-stale page instead of a stuck one.
The half-and-half split (paged timer over the looping form-guide figure)
is now iPhone-only. On the watch the ExerciseProgressView TabView fills the
whole screen — the figure slot is gone from both the active flow and the
Completed state, and the ExerciseFigure sources and ExerciseMotions
resources are dropped from the watch target since nothing there uses them.
Claude-Session: https://claude.ai/code/session_01HJDQQDA9QdP8zByg43H5v3
The orbit was always a real camera orbit — figure and props share one
rigid rotation — but a bar's screen-space angle authored the wrong 3D
rod: the default horizontal encoded a rod along the body axis, so
barbells hovered fixed on screen and vanished at the head-on view
where they should span widest. Line props now take "axis": "z" (both
renderers in lockstep, fixture-pinned): the world left-right direction
projects through the camera pitch like the floor quad — end-on plates
in profile, full span face-on, swinging with the hands in between.
Applied to the ten cross-body bars; vertical handles were already
orbit-invariant.
Goblet Squat's hand pins sat so close to the shoulders that the
two-bone IK was degenerate, flipping between a chicken-wing and an
elbow-behind solve; re-pinned level with the shoulders so the elbows
tuck straight down through the whole rep.
Claude-Session: https://claude.ai/code/session_01HJDQQDA9QdP8zByg43H5v3
Changelog entries for the Live Activity, mid-workout library adds,
backups, diagnostics, watch-only Health recording, navigation and
accessibility improvements, and the bug fixes; README key features
updated to match.
Claude-Session: https://claude.ai/code/session_01HJDQQDA9QdP8zByg43H5v3
Weight moves up beside the exercise name (matching font), sets × reps
sits below it with a dimmed ×, and recorded machine settings show as a
secondary line under the name — no placeholder when unconfigured.
Single-line bodyweight rows center against the checkbox.
Claude-Session: https://claude.ai/code/session_01P152LxjZ4vePHsSorQa5Jf
Abdominal's pinned hands used elbow -40 as the IK plane hint, drawing
the arms hyperextended (user-reported). Flipping the hint bends the
elbows the natural way while the hands stay on the handles. Same class
of fix for the milder cases: Arm Curl and Shoulder Press elbows and
Calfs knees clamp to -8, Side Plank's raised arm to the -70 ROM cap.
The whole library now passes render.py --strict with zero warnings,
making it a valid verification gate. Fixtures regenerated; 48 tests
green.
Claude-Session: https://claude.ai/code/session_01HJDQQDA9QdP8zByg43H5v3
render.py --export bundles the 25 new motion rigs and info pages;
figure-fixtures.json regenerated for all 47 (the Swift solver reproduces
every new motion, including negative-y pins and the new prop uses). The
fixture count assertion moves to 47, and the no-bundled-motion test now
uses Treadmill - a permanent COVERAGE.md exclusion - since Bench Press
exists. 48 tests green; watch target builds. Coverage handoff complete -
TODO-coverage.md retired.
Claude-Session: https://claude.ai/code/session_01HJDQQDA9QdP8zByg43H5v3
With the equipment layer carrying world-space 3D form, the prop-free
gate comes off: machines now get the same slow orbit as the bodyweight
moves, their seats, cables, bars, and rollers turning with the figure.
Closes out the orbit-for-all-exercises plan.
Claude-Session: https://claude.ai/code/session_01HJDQQDA9QdP8zByg43H5v3
The floor rectangle was screen-locked, which broke the illusion the
moment the camera orbited. It is now a world-space quad on the ground
plane, sized to each motion's projected footprint across its key frames
and rotated through the same camera as the figure - a long rectangle in
profile, a parallelogram mid-orbit, end-on when face-on. Both renderers
in lockstep; fixtures unaffected (the mat is a pure addition).
Claude-Session: https://claude.ai/code/session_01LEoff8bXGBS83tK1c55Mf7
The default camera pitches down 10 degrees, so the floor reads as a
plane (drawn as a rectangle) and near/far contacts straddle it.
Elevation is pure presentation - IK pins solve in the flat authored
view and the posed body tilts, the same pattern as the orbit, so
authored canvas targets never go out of reach. The leg-extension
roller moves up onto the shin above the ankle and the leg-curl roller
tucks under the heel. Fixtures and reference test values regenerated
for the pitched camera.
Claude-Session: https://claude.ai/code/session_01LEoff8bXGBS83tK1c55Mf7
Shoulder and pelvis widths grow to human-like proportions per profile
(shoulders wider than hips for neutral/male, reversed for female) and
are now drawn — bars across the attach points that read near-full-width
face-on and as a shoulder/hip nub in profile, so limbs visibly hang
from a torso instead of a point. Orbiting no longer re-solves IK pins
in the rotated view (pins are canvas targets in the authored camera):
the pose resolves first and the posed body rotates, which fixes hands
sticking to stale screen points mid-orbit (Cat-Cow, Bird Dog, Plank).
Leg Extension and Leg Curl swap their ankle bars for a machine roller
disc — a new `roller` prop riding the shin's press side. Fixtures
regenerated; both renderers updated in lockstep.
Claude-Session: https://claude.ai/code/session_01LEoff8bXGBS83tK1c55Mf7
Bodyweight motions (no equipment layer, no hide list) now turn the
camera a full revolution every 24 seconds while the motion loops, so
the exercise reads from every side; machine exercises keep their
authored view, since scene equipment is a view-locked billboard and a
hide list describes a single viewpoint.
Claude-Session: https://claude.ai/code/session_01LEoff8bXGBS83tK1c55Mf7
The library's planar world-angle rig becomes a genuine 3D anatomical
model: skeleton.json holds bone-length profiles (real shoulder/pelvis
widths, feet, neutral/female/male) and per-joint ROM; motions pose
joints with anatomical angles (flexion/abduction/rotation from neutral
standing) under a per-exercise orthographic camera, resolved by
kinematics.py (3D FK, analytic two-bone IK with anatomical write-back)
and validated against physiological ranges. All 20 sagittal motions
were migrated by planar decomposition with 0.00 px golden parity against
the old renderer — relabeled to true anatomy, since shading is now
near-dark/far-light by camera depth rather than by limb suffix — and
the face-on machines are re-authored honestly: Abductor/Adductor with
real hip abduction (the foreshortened "frontal" profile is retired) and
Rotary with genuine spine axial rotation. Figures gain articulated
feet; profiles swap without touching a single motion script; --orbit
sweeps the camera 360° while a motion loops.
The in-app SwiftUI renderer (iOS + watch) is ported to the same model
and consumes the exported motions verbatim; figure-fixtures.json pins
its geometry to the Python pipeline within 0.5 px across every
exercise, key frame, tween, and orbit sample. Also makes the watch
bridge logger nonisolated for the newer SDK's stricter isolation
checking.
Claude-Session: https://claude.ai/code/session_01LEoff8bXGBS83tK1c55Mf7
The exercise picker now lists the bundled exercise library — the
motion-rig exercises exported from Exercise Library/ — instead of the
two *.exercises.yaml starter catalogs. ExerciseListLoader and the Yams
dependency are removed; ExerciseMotionLibrary gains exerciseNames, the
bundle enumeration the picker reads.
Starter splits ship as byte-canonical SplitDocument JSON with fixed
ULIDs (Workouts/Resources/StarterSplits, regenerated by
Scripts/generate_starter_splits.swift) and auto-seed after connect into
a verifiably empty container, re-checked after a settle delay — wrong
guesses are harmless because identical bytes make same-path conflicts
empty and tombstones reap resurrected seeds. Seeds are immutable:
SyncEngine.save(split:) forks an edited seed to a fresh ULID and
soft-deletes the original, whose stub is exempt from pruning
(IndieSync 0.3.0 prune(exempting:)) and vetoes resurrection forever;
split views resolve by id through a redirect map to follow the swap.
Add Starter Splits in Settings restores deleted seeds by lifting the
veto stub and rewriting the bundle bytes.
Also fixes ingestFromWatch bypassing the tombstone veto (a phone-deleted
workout resurrected when a stale watch resent it) and reaps a live file
immediately when its tombstone arrives.
SplitDetailView also picks up the category-grouped exercise sections
from the exercise-category work.
Closes the last open loop of the HealthKit feature (decision C from
HealthKit-Delete-Loop.md, now retired): the history-list delete dialog
gains a "Delete + Remove from Apple Health" option, shown only when the
workout has a Health record. Removal is best-effort via the workout's
stored HKWorkout UUID; watch-recorded workouts are authored by the
watch app's separate HealthKit source and may be refused, so the dialog
notes they may need deleting in the Health app instead. Discarding an
in-progress workout is unaffected (no Health record exists yet).
Watch sessions now run an HKLiveWorkoutBuilder: heart rate and active
energy are collected live (shown in an in-workout HUD), saved to Health
as a real HKWorkout on completion, and carried back to the phone as
WorkoutMetrics on the workout document. Phone-only workouts get an
estimated Health workout (MET x bodyweight x duration) after a 10s
debounce that a late-arriving watch session cancels; a launch sweep
backfills workouts completed within the last day. Dedupe is keyed on
metrics.healthKitWorkoutUUID plus the metrics source.
Splits gain an activity type (strength, functional, HIIT, core, cardio,
cycling) that categorizes the Health workout and picks the MET value.
A post-workout summary sheet (duration, calories, avg/max HR, HR zones,
total volume) fills in live and is also shown on completed workouts.
Weights can now display in lb or kg (display-only relabel), synced to
the watch over the existing application context.
WorkoutDocument schema 1->2 (metrics are irreplaceable, so older apps
must quarantine rather than strip them); cache schema 2 rebuilds the
SwiftData store with the new metric columns. Deleting a workout in the
app intentionally leaves its Health record in place.
rzen